包含unknownmediatype的词条
为什么出现error on initialize vlan的信息
Pascal运行错误信息
运行错误分为四类:1-99为DOS错误;100-149为I/O错误,发生I/O后,如果使用了编译开关{$I+},程序将终止执行,否则编译开关为{$I-},程序继续执行,并由IOResult函数返回错误信息;
150-199为严重错误,200-255为致命错误,致命错误将立即终止程序执行。
错误代码及错误信息 错误释义
error 1:Invalid function number 无效函数号
error 2:File not found 文件未找到
error 3:Path not found 找不到路径
error 4:Too many open files 打开文件太多
error 5:File access denied 文件不允许访问
error 6:Invalid file handle 无效文件句柄
error 12:Invalid file access code 无效文件存取代码
error 15:Invalid drive number 无效驱动器号
error 16:Cannot remove current directory 不能删除当前目录
error 17:Cannot rename across drives 不能跨驱动器改名
error 18:No more files 没有文件了
error 100:Disk read error 读磁盘错
error 101:Disk write error 写磁盘错
error 102:File not assigned 文件变量未赋值
error 103:File not open 文件未打开
error 104:File not open for input 文件未打开为写方式
error 105:File not open for output 文件未打开为读方式
error 106:Invalid numeric format 无效数值格式
error 150:Disk is write-protected 磁盘写保护
error 151:Bad drive request struct length 错误的驱动器请求结构长度
error 152:Drive not ready 驱动器未准备好
error 154:CRC error in data 数据CRC校验错
error 156:Disk seek error 磁盘定位错
error 157:Unknown media type 未知的介质类型
error 158:Sector Not Found 找不到扇区
error 159:Printer out of paper 打印机缺纸
error 160:Device write fault 设备写错误
error 161:Device read fault 设备读错误
error 162:Hardware failure 硬件故障
error 200:Division by zero 被零除
error 201:Range check error 范围检查出错
error 202:Stack overflow error 栈溢出
error 203:Heap overflow error 堆溢出
error 204:Invalid pointer operation 无效的指针操作
error 205:Floating point overflow 浮点运算上溢
error 206:Floating point underflow 浮点运算下溢
error 207:Invalid floating point operation 无效的浮点运算
error 208:Overlay manager not installed 未安装覆盖管理程序
error 209:Overlay file read error 读覆盖文件错误
error 210:Object not initialized 对象未初始化
error 211:Call to abstract method 调用抽象方法
error 212:Stream registration error 流注册错误
error 213:Collection index out of range 集合下标越界
error 214:Collection overflow error 集合上溢
error 215:Arithmetic overflow error 算术运算上溢
error 216:General Protection fault 一般保护性错误
avi视频播放不了,如何解决?
很多影音文件虽然都用AVI做后缀名,但不要以为它们都是一样的,有编码的不同,有压缩率的不同,因此你可能会遇到播放器能播放这个AVI文件,却不能播放另一个AVI文件的现象。
用万能播放器就能播放,给你一个最全面的选择吧!请根据自己的需要下载,我觉得KMPlayer不错!
谁可称王?八款万能播放器横向评测及下载
1,KMPlayer 2.9.1.1045 汉化版 [点击下载]
2,绚彩魅影 3.0 Beta 10 [点击下载]
3,GOM Player 2.0 简体中文版 [点击下载]
4,超级兔子快乐影音 2.1 [点击下载]
5,VLC (VideoLAN) 0.8.5 test1 [点击下载]
6,Mplayer 1.0 KK编译0303 [点击下载]
7,暴风影音 6.01.28 [点击下载]
8,My MPC CCF 2006 修订版
Unknown media type in type all/all'这是怎么回事
这是传统的写法,假如你要写
CSS样式的话,这个type当然不
能更改,要不浏览器怎么
帮你解析呢! media是指设备的...
恢复软件恢复的mp4视频无法播放
1、先把文件复制出来。
2、首先安装一个播放器,试试能不能播放,这个本地播放器支持的格式较多,如果能放,把能放的片段截取下来,选择无损视频保存。
2、如果不能的话用格式工厂转下码。这只是尝试,如果还不行,文件损坏的太严重,就没办法了。
free pascal的错误代码
Free Pascal错误代码表
OI爱好者(OIFans.cn)
1 Invalid function number
错误的功能代码
尝试错误的操作系统调用.
2 File not found
文件未找到
程序试图删除(erase),重命名( rename),打开(open)一个不存在的文件.
3 Path not found
目录未发现
目录不存在或是错误.也有可能是访问一个不存在的文件.
4 Too many open files
打开太多的文件
当前你的程序当前打开的文件太多咯.超过了操作系统允许打开的最多文件数.
5 File access denied
文件访问拒绝
访问文件拒绝.引起这个错误可能是下面几个原因:
试图写一个只读文件,或者实际上是一个目录.
文件正在为其他程序所使用.
试图建立一个目录中已经存在的文件名的文件.
试图从一个只能写的文件中读数据.
试图从一个只能读的文件中写数据.
试图移除一个不存在的文件或目录.
不允许访问这个文件或者目录.
6 Invalid file handle
错误的文件句柄
表示你的文件表示府已经失效; 指出你的内存已经混乱.
12 Invalid file access code
错误的文件访问代码
reset 或 rewrite 使用一个错误的文件模式值.
15 Invalid drive number
错误的驱动器数字
Getdir或者ChDir函数所使用数字指向了一个不存在的磁盘.
16 Cannot remove current directory
不能移动当前目录
试图移除的目录是当前活动目录..
17 Cannot rename across drives
不能跨越驱动器更改文件名
你不能重命名一个文件,它可能在另一个磁盘或分区结束.
100 Disk read error
磁盘读错误
从磁盘读数据时错误.具有代表性的是你读文件超过了文件结尾.
101 Disk write error
磁盘写错误
磁盘已经满咯,可是你还试图写入数据..
102 File not assigned
文件未曾建立关联
使用Reset, Rewrite, Append, Rename和 Erase 之前你必须已经将文件标识符与磁盘文件建立关联.
103 File not open
文件未打开
在使用 Close, Read, Write, Seek, EOf, FilePos, FileSize, Flush, BlockRead, and BlockWrite 之前未打开文件.
104 File not open for input
文件不能打开读数据
在使用 Read, BlockRead, Eof, Eoln, SeekEof or SeekEoln 之前文件未使用Reset打开.
105 File not open for output
文件不能打开写数据
使用write之前未使用Rewrite打开.
106 Invalid numeric format
错误的数字格式
从标准输入(Text文件)中预期得到的数字格式不对.
150 Disk is write-protected
磁盘写保护
(Critical error)=临界误差
151 Bad drive request struct length
(Critical error)
152 Drive not ready
驱动器未准备好
(Critical error)
154 CRC error in data
数据CRC校检错误
(Critical error)
156 Disk seek error
磁盘寻道错误
(Critical error)
157 Unknown media type
不明的媒体类型
(Critical error)
158 Sector Not Found
磁盘扇区错误
(Critical error)
159 Printer out of paper
打印超过纸张
(Critical error)
160 Device write fault
设备写错误
(Critical error)
161 Device read fault
设备读错误
(Critical error)
162 Hardware failure
硬件失灵
(Critical error)
200 Division by zero
被除数为0.
201 Range check error
如果你便以你的程序时设置了方位检查,原因有可能是:
数组访问超过了声明的范围.
试图给一个变量赋值超过其范围(例如枚举类型).
202 Stack overflow error
栈溢出
栈增长超过了最大值 (in which case the size of local variables should be reduced to avoid this error), or the stack has become corrupt. 只有当栈检查时才出现该错误.
203 Heap overflow error
堆溢出
堆增长超过了上界. This is caused when trying to allocate memory exlicitly with New, GetMem or ReallocMem, or when a class or object instance is created and no memory is left. Please note that, by default, Free Pascal provides a growing heap, i.e. the heap will try to allocate more memory if needed. However, if the heap has reached the maximum size allowed by the operating system or hardware, then you will get this error.
204 Invalid pointer operation
错误的指针操作
使用 Dispose or Freemem 时使用错误的指针 (特别的, Nil)
205 Floating point overflow
浮点数上溢
你试图使用或产生一个太大实数.
206 Floating point underflow
你试图使用或产生一个太小实数.
207 Invalid floating point operation
错误的浮点数操作
可能是你开平方根或者对数时使用负数.
210 Object not initialized
对象位初始化
When compiled with range checking on, a program will report this error if you call a virtual method without having called istr constructor.
211 Call to abstract method
Your program tried to execute an abstract virtual method. Abstract methods should be overridden, and the overriding method should be called.
212 Stream registration error
This occurs when an invalid type is registered in the objects unit.
213 Collection index out of range
You are trying to access a collection item with an invalid index (objects unit).
214 Collection overflow error
The collection has reached its maximal size, and you are trying to add another element (objects unit).
215 Arithmetic overflow error
This error is reported when the result of an arithmetic operation is outside of its supported range. Contrary to Turbo Pascal, this error is only reported for 32-bit or 64-bit arithmetic overflows. This is due to the fact that everything is converted to 32-bit or 64-bit before doing the actual arithmetic operation.
216 General Protection fault
The application tried to access invalid memory space. This can be caused by several problems:
Deferencing a nil pointer
Trying to access memory which is out of bounds (for example, calling move with an invalid length).
217 Unhandled exception occurred
An exception occurred, and there was no exception handler present. The sysutils unit installs a default exception handler which catches all excpetions and exits gracefully.
219 Invalid typecast
Thrown when an invalid typecast is attempted on a class using the as operator. This error is also thrown when an object or class is typecast to an invalid class or object and a virtual method of that class or object is called. This last error is only detected if the -CR compiler option is used.
227 Assertion failed error
An assertion failed, and no AssertErrorProc procedural variable was installed.
free pascal 执行程序 出现 bad command or file name
error 1: Out of memory 内存溢出
error 2: Identifier expected 缺标识符
error 3: Unknown identifier 未定义的标识符
error 4: Duplicate identifier 重复定义的标识符
error 5: Syntax error 语法错误
error 6: Error in real constant 实型常量错误
error 7: Error in integer constant 整型常量错误
error 8: String constant exceeds line 字符串常量超过一行
error 10: Unexpected end of file 文件非正常结束
error 11: Line too long 行太长
error 12: Type identifier expected 未定义的类型标识符
error 13: Too many open files 打开文件太多
error 14: Invalid file name 无效的文件名
error 15: File not found 文件未找到
error 16: Disk full 磁盘满
error 17: Invalid compiler directive 无效的编译命令
error 18: Too many files 文件太多
error 19: Undefined type in pointer def 指针定义中未定义类型
error 20: Variable identifier expected 缺变量标识符
error 21: Error in type 类型错误
error 22: Structure too large 结构类型太长
error 23: Set base type out of range 集合基类型越界
error 24: File components may not be files or objectsfile分量不能是文件或对象
error 25: Invalid string length 无效的字符串长度
error 26: Type mismatch 类型不匹配
error 27: error 27: Invalid subrange base type 无效的子界基类型
error 28: Lower bound greater than upper bound 下界超过上界
error 29: Ordinal type expected 缺有序类型
error 30: Integer constant expected 缺整型常量
error 31: Constant expected 缺常量
error 32: Integer or real constant expected 缺整型或实型常量
error 33: Pointer Type identifier expected 缺指针类型标识符
error 34: Invalid function result type 无效的函数结果类型
error 35: Label identifier expected 缺标号标识符
error 36: BEGIN expected 缺BEGIN
error 37: END expected 缺END
error 38: Integer expression expected 缺整型表达式
error 39: Ordinal expression expected 缺有序类型表达式
error 40: Boolean expression expected 缺布尔表达式
error 41: Operand types do not match 操作数类型不匹配
error 42: Error in expression 表达式错误
error 43: Illegal assignment 非法赋值
error 44: Field identifier expected 缺域标识符
error 45: Object file too large 目标文件太大
error 46: Undefined external 未定义的外部过程与函数
error 47: Invalid object file record 无效的OBJ文件格式
error 48: Code segment too large 代码段太长
error 49: Data segment too large 数据段太长
error 50: DO expected 缺DO
error 51: Invalid PUBLIC definition 无效的PUBLIC定义
error 52: Invalid EXTRN definition 无效的EXTRN定义
error 53: Too many EXTRN definitions 太多的EXTRN定义
error 54: OF expected 缺OF
error 55: INTERFACE expected 缺INTERFACE
error 56: Invalid relocatable reference 无效的可重定位引用
error 57: THEN expected 缺THEN
error 58: TO or DOWNTO expected 缺TO或DOWNTO
error 59: Undefined forward 提前引用未经定义的说明
error 61: Invalid typecast 无效的类型转换
error 62: Division by zero 被零除
error 63: Invalid file type 无效的文件类型
error 64: Cannot read or write variables of this type 不能读写此类型变量
error 65: Pointer variable expected 缺指针类型变量
error 66: String variable expected 缺字符串变量
error 67: String expression expected 缺字符串表达式
error 68: Circular unit reference 单元UNIT部件循环引用
error 69: Unit name mismatch 单元名不匹配
error 70: Unit version mismatch 单元版本不匹配
error 71: Internal stack overflow 内部堆栈溢出
error 72: Unit file format error 单元文件格式错误
error 73: IMPLEMENTATION expected 缺IMPLEMENTATION
error 74: Constant and case types do not match 常量和CASE类型不匹配
error 75: Record or object variable expected 缺记录或对象变量
error 76: Constant out of range 常量越界
error 77: File variable expected 缺文件变量
error 78: Pointer expression expected 缺指针表达式
error 79: Integer or real expression expected 缺整型或实型表达式
error 80: Label not within current block 标号不在当前块内
error 81: Label already defined 标号已定义
error 82: Undefined label in preceding statement part 在前面未定义标号
error 83: Invalid @ argument 无效的@参数
error 84: UNIT expected 缺UNIT
error 85: ";" expected 缺“;”
error 86: ": " expected 缺“:”
error 87: "," expected 缺“,”
error 88: "(" expected 缺“(”
error 89: ")" expected 缺“)”
error 90: "=" expected 缺“=”
error 91: ":=" expected 缺“:=”
error 92: "[" or "(." Expected 缺“[”或“(.”
error 93: "]" or ".)" expected 缺“]”或“.)”
error 94: "." expected 缺“.”
error 95: ".." expected 缺“..”
error 96: Too many variables 变量太多
error 97: Invalid FOR control variable 无效的FOR循环控制变量
error 98: Integer variable expected 缺整型变量
error 99: Files and procedure types are not allowed here 该处不允许文件和过程类型
error 100: String length mismatch 字符串长度不匹配
error 101: Invalid ordering of fields 无效域顺序
error 102: String constant expected 缺字符串常量
error 103: Integer or real variable expected 缺整型或实型变量
error 104: Ordinal variable expected 缺有序类型变量
error 105: INLINE error INLINE错误
error 106: Character expression expected 缺字符表达式
error 107: Too many relocation items 重定位项太多
error 108: Overflow in arithmetic operation 算术运算溢出
error 112: CASE constant out of range CASE常量越界
error 113: Error in statement 表达式错误
error 114: Cannot call an interrupt procedure 不能调用中断过程
error 116: Must be in 8087 mode to compile this 必须在8087模式编译
error 117: Target address not found 找不到目标地址
error 118: Include files are not allowed here 该处不允许INCLUDE文件
error 119: No inherited methods are accessible here 该处继承方法不可访问
error 121: Invalid qualifier 无效的限定符
error 122: Invalid variable reference 无效的变量引用
error 123: Too many symbols 符号太多
error 124: Statement part too large 语句体太长
error 126: Files must be var parameters 文件必须是变量形参
error 127: Too many conditional symbols 条件符号太多
error 128: Misplaced conditional directive 条件指令错位
error 129: ENDIF directive missing 缺ENDIF指令
error 130: Error in initial conditional defines 初始条件定义错误
error 131: Header does not match previous definition 和前面定义的过程或函数不匹配
error 133: Cannot evaluate this expression 不能计算该表达式
error 134: Expression incorrectly terminated 表达式错误结束
error 135: Invalid format specifier 无效格式说明符
error 136: Invalid indirect reference 无效的间接引用
error 137: Structured variables are not allowed here 该处不允许结构变量
error 138: Cannot evaluate without System unit 没有System单元不能计算
error 139: Cannot access this symbol 不能存取符号
error 140: Invalid floating point operation 无效的符号运算
error 141: Cannot compile overlays to memory 不能编译覆盖模块至内存
error 142: Pointer or procedural variable expected 缺指针或过程变量
error 143: Invalid procedure or function reference 无效的过程或函数调用
error 144: Cannot overlay this unit 不能覆盖该单元
error 146: File access denied 不允许文件访问
error 147: Object type expected 缺对象类型
error 148: Local object types are not allowed 不允许局部对象类型
error 149: VIRTUAL expected 缺VIRTUAL
error 150: Method identifier expected 缺方法标识符
error 151: Virtual constructors are not allowed 不允许虚构造函数
error 152: Constructor identifier expected 缺构造函数标识符
error 153: Destructor identifier expected 缺析构函数标识符
error 154: Fail only allowed within constructors Fail标准过程只能用于构造函数
error 155: Invalid combination of opcode and operands 操作数与操作符无效组合
error 156: Memory reference expected 缺内存引用指针
error 157: Cannot add or subtract relocatable symbols 不能加减可重定位符号
error 158: Invalid register combination 无效寄存器组合
error 159: 286/287 instructions are not enabled 未激活286/287指令
error 160: Invalid symbol reference 无效符号指针
error 161: Code generation error 代码生成错误
error 162: ASM expected 缺ASM
error 166: Procedure or function identifier expected 缺过程或函数标识符
error 167: Cannot export this symbol 不能输出该符号
error 168: Duplicate export name 外部文件名重复
error 169: Executable file header too large 可执行文件头太长
error 170: Too many segments 段太多
运行错误信息
运行错误分为四类:
1、1-99为DOS错误;
2、100-149为I/O错误。
发生I/O后,如果使用了编译开关{$I+},程序将终止执行,否则编译开关为{$I-},程序继续执行,并由IOResult函数返回错误信息;
3、150-199为严重错误;
4、200-255为致命错误。
致命错误将立即终止程序执行。
错误代码及错误信息 错误释义
error 1:Invalid function number 无效函数号
error 2:File not found 文件未找到
error 3:Path not found 找不到路径
error 4:Too many open files 打开文件太多
error 5:File access denied 文件不允许访问
error 6:Invalid file handle 无效文件句柄
error 12:Invalid file access code 无效文件存取代码
error 15:Invalid drive number 无效驱动器号
error 16:Cannot remove current directory 不能删除当前目录
error 17:Cannot rename across drives 不能跨驱动器改名
error 18:No more files 没有文件了
error 100:Disk read error 读磁盘错
error 101:Disk write error 写磁盘错
error 102:File not assigned 文件变量未赋值
error 103:File not open 文件未打开
error 104:File not open for input 文件未打开为写方式
error 105:File not open for output 文件未打开为读方式
error 106:Invalid numeric format 无效数值格式
error 150:Disk is write-protected 磁盘写保护
error 151:Bad drive request struct length 错误的驱动器请求结构长度
error 152:Drive not ready 驱动器未准备好
error 154:CRC error in data 数据CRC校验错
error 156:Disk seek error 磁盘定位错
error 157:Unknown media type 未知的介质类型
error 158:Sector Not Found 找不到扇区
error 159:Printer out of paper 打印机缺纸
error 160:Device write fault 设备写错误
error 161:Device read fault 设备读错误
error 162:Hardware failure 硬件故障
error 200:Division by zero 被零除
error 201:Range check error 范围检查出错
error 202:Stack overflow error 栈溢出
error 203:Heap overflow error 堆溢出
error 204:Invalid pointer operation 无效的指针操作
error 205:Floating point overflow 浮点运算上溢
error 206:Floating point underflow 浮点运算下溢
error 207:Invalid floating point operation 无效的浮点运算
error 208:Overlay manager not installed 未安装覆盖管理程序
error 209:Overlay file read error 读覆盖文件错误
error 210:Object not initialized 对象未初始化
error 211:Call to abstract method 调用抽象方法
error 212:Stream registration error 流注册错误
error 213:Collection index out of range 集合下标越界
error 214:Collection overflow error 集合上溢
error 215:Arithmetic overflow error 算术运算上溢
error 216:General Protection fault 一般保护性错误